712-578-9336
Home | All Kits | Foam Wings | Accessories | Custom Foam Cutting | Contact Us | View Cart
Hawker Hurricane
94.5" wingspan
42cc - 62cc Gas Engine
Designed by Dick Sarpolis
Flying Models Magazine August 2003
Foam pieces for flat stab and fin are not included. Built up style on the plans is recommended.
Plans are available from Flying Models
Fiberglass Cowl and Clear Canopy available from Fiberglass Specialties #FM-202 & FM-202C
 |
Hawker Hurricane Short Kit - Flying Models (No wing) | 130.00 |
|
|
Hawker Hurricane Foam Wing - 3 pieces | 110.00 |
| Shipping calculated at checkout |
|
Short Kit Contents: |
|
| 2 | Fuse Sides (1/8" balsa) |
| 1 | Firewall (3/8" PLY) |
| 4 | Formers (1/8" balsa) |
| 4 | Formers (1/8" PLY) |
| 1 | Former Doubler (1/8" PLY) |
| 1 | Wing Mount Tab (1/4" PLY) |
| 1 | Wing screw block (1/8" + 1/4" PLY) |
| 4 | Landing Gear braces (1/8" PLY) |
| 2 | Wing Mount Tab Braces (1/8" PLY) |
| 2 | Fuse rear doublers (1/8" balsa) |
| 2 | Wing saddle doublers (1/8" balsa) |
| 2 | Front fuse doublers (1/16" PLY) |
| 1 | Dihedral Brace (1/8" PLY) |
| 2 | Landing Gear Door Covers (1/8" PLY) |
| 2 | Scoop sides (1/8" balsa) |
| 1 | Tail Wheel Doors (1/4" balsa x 2) |
| Fiberglass Cowl and Clear Canopy available from Fiberglass Specialties | |
| Foam wing (3 pieces) | |
| contents subject to change |
copyright 2021 EAC