Phantom 1 by Bob Klineyoung

Your R/C source in the heart of the Ozarks

479-239-4427

Phantom 1

Short Kit

By Bob Klineyoung

Wingspan 66", 51.25" length

.61 2C engine

The Phantom is available either as a fuse only, or a Fuse with Foam Wing and Stab. The Foam profiles are on the plans, if you wish to cut your own. There is a full wood pack also available.

The Plans are available from RCM plans service

PDF of parts included in short kit can be downloaded here.

	Phantom 1 Fuse Short Kit	$95.00
	Phantom 1 Foam wing & Stab	$52.50
	Phantom 1 Fuse short kit & Foam Wing/Stab Combo (save $10)	$140.00
	Phantom 1 Plans Available from RCM Plans . (They asked that we don't sell them)
	Phantom 1 Full wood pack for using wood ailerons and elevators	$76.00
	Phantom 1 Full wood pack for ailerons and elevators cut from sheeted Wing & Stab	$69.00
	Shipping will be calculated during checkout.

Below is the Wood included in the full wood pack. This is the wood needed to complete the plane, in case you don't wish to purchase it separately. There are 2 versions, depending if you want to use wood ailerons and elevators, or cut the ailerons and elevators from the sheeted wing and stab. Order the one you want, and we will cut the foam wing and stab accordingly.

	Wood kit (Foam Control Surfaces cut from sheeted wing & Stab)
20	1/16" x4" x36" Balsa	W&S Sheeting
1	1/8"x4"x48" Balsa	Fuse Bottom
1	1/4" x 3/4" x 12" Balsa	Tank Area
1	1/16"x 4" x 6" PLY	tank floor
3	3/8" x 3" x 48" Balsa	Fuse top
2	1/2" x 48" Tristock	Fuse Bottom
2	1/4" x 1/4" x 48 Balsa	Stringers
1	1/4" x 3" x 6" PLY	Dihedral Brace
1	1/4" x 12" dowel	wing mount
1	1/4" x 4" x 36" balsa	Wing LE & Aileron/Stab facing
1	1/4" x 1/4" x 12" spruce	Stab spar & firewall braces
2	3/8" x 3/4" x 2" Hardwood	Wing Mount
1	3/8" x 3/8" x 36" balsa	Stab LE
1	2" x 3" x 12" Balsa Block	Nose top and bottom

	Wood kit (Wood Control Surfaces)
20	1/16" x4" x36" Balsa	W&S Sheeting
1	1/8"x4"x48" Balsa	Fuse Bottom
1	1/4" x 3/4" x 12" Balsa	Tank Area
1	1/16"x 4" x 6" PLY	tank floor
3	3/8" x 3" x 48" Balsa	Fuse top
2	1/2" x 48" Tristock	Fuse Bottom
2	1/4" x 1/4" x 48 Balsa	Stringers
1	1/4" x 3" x 6" PLY	Dihedral Brace
1	1/4" x 12" dowel	wing mount
2	1/4" x 1" x 36" balsa	Wing LE
2	3/8" x 1-1/2" x 36" Tapered	Ailerons
2	3/8" x 1/2" x 36"	Wing TE
1	1/4" x 1/4" x 12" spruce	Stab spar & firewall braces
2	3/8" x 3/4" x 2" Hardwood	Wing Mount
2	3/8" x 3/8" x 36" balsa	Stab LE&TE
1	2" x 3" x 12" Balsa Block	Nose top and bottom

Hit Counter

11/30/2009